info@dolphinmarines.com
D Type Rubber Fender
D Type Rubber Fenders can be pre-curved, chamfered and drilled to aid installation at a relatively low cost and can also be cut to the length required. These fenders provide an excellent barrier against damage from all sizes and shapes of vessels.
D Type Rubber Fenders provide an excellent barrier against damage from all sizes and shapes of vessels. They are ideal for smaller quays and wharves serving fishing boats, tugs, barges and other work craft. D Type Fenders are also commonly used on pontoons and on inland waterways for lock protection. The flat rear face of D Type fender makes them easy to install with a flat bar down the bore. DOLPHIN MARINE D Type Rubber Fenders can be supplied in long lengths with maximum length restricted only by transport and handling limitations.
D Rubber Fenders are also called Extrusion Fenders. Extrusion is a manufacturing process involving pushing unvulcanized rubber through a special die to form a constant cross-section profile. This is a simple and cost effective production method for smaller fenders and allows sections to be made in very long lengths. Special profiles can also be produced economically to customer’s specific requirements.
D Type Rubber Fender Specification
Note: All data above are examples for reference only. Any other size, shape can be developed as per customized formats.
D Rubber Fenders are also called Extrusion Fenders. Extrusion is a manufacturing process involving pushing unvulcanized rubber through a special die to form a constant cross-section profile. This is a simple and cost effective production method for smaller fenders and allows sections to be made in very long lengths. Special profiles can also be produced economically to customer’s specific requirements.
D Type Rubber Fender Specification
|
D Type Fender Specification |
|||||||||
|
Size |
Dimensions (mm) |
||||||||
|
(mm) |
H |
B |
L |
Holes |
Q |
C |
h |
D |
d |
|
D150x150x1000L |
150 |
150 |
1000 |
3 |
350 |
150 |
25 |
40 |
24 |
|
D200x200x1000L |
200 |
200 |
1000 |
3 |
350 |
150 |
35 |
55 |
30 |
|
D200x200x3000L |
200 |
200 |
3000 |
8 |
400 |
100 |
35 |
55 |
30 |
|
D250x250x1000L |
250 |
250 |
1000 |
3 |
350 |
150 |
35 |
60 |
30 |
|
D250x250x3000L |
250 |
250 |
3000 |
8 |
400 |
100 |
35 |
60 |
30 |
|
D300x300x1000L |
300 |
300 |
1000 |
3 |
350 |
150 |
40 |
65 |
32 |
|
D300x300x3000L |
300 |
300 |
3000 |
8 |
400 |
100 |
40 |
65 |
32 |
|
D300x360x1000L |
300 |
360 |
1000 |
3 |
350 |
150 |
40 |
65 |
32 |
|
D300x360x3000L |
300 |
360 |
3000 |
8 |
400 |
100 |
40 |
65 |
40 |
|
D400x400x1000L |
400 |
400 |
1000 |
3 |
350 |
150 |
55 |
80 |
32 |
|
D400x400x3000L |
400 |
400 |
3000 |
8 |
400 |
100 |
55 |
80 |
40 |
|
D500x500x1000L |
500 |
500 |
1000 |
3 |
350 |
150 |
90 |
97 |
45 |
|
D500x500x3000L |
500 |
500 |
3000 |
8 |
400 |
100 |
90 |
97 |
45 |
Note: All data above are examples for reference only. Any other size, shape can be developed as per customized formats.
D Type Rubber fender Features:
· deal for smaller quays and wharves
· Easy to install with a flat bar down the bore
· Can be supplied in long lengths and be cut to length, angle cut at the ends
· Easy to install with a flat bar down the bore
· Can be supplied in long lengths and be cut to length, angle cut at the ends
Application
·
· Smaller jetties and wharves
· Workboats and service craft
· Mooring pontoon protection
· Inland waterways
· General purpose applications
· Smaller jetties and wharves
· Workboats and service craft
· Mooring pontoon protection
· Inland waterways
· General purpose applications
Product Categories
Contact Info
E-mail: info@dolphinmarines.com
Tel: 00852-29738324
Fax: 00852-21159613
